Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Influences of aging on thermal decomposition mechanism of high performance oxidizer ammonium dinitramide

Ammonium dinitramide (ADN) is one of the several promising new solid propellant oxidizers. ADN is of interest because its oxygen balance and energy content are high, and it also halogen-free. One of the most important characteristics of a propellant oxidizer, however, is stability and ADN is known to degrade to ammonium nitrate (AN) during storage, which will affect its performance. This study focused on the effects of aging on the thermal decomposition mechanism of ADN. The thermal behaviors of ADN and ADN/AN mixtures were studied, as were the gases evolved during their decomposition, using differential scanning calorimetry (DSC), thermogravimetry–differential thermal analysis-infrared spectrometry (TG–DTA-IR), and thermogravimetry–differential thermal analysis-mass spectrometry (TG–DTA-MS). The results of these analyses demonstrated that the decomposition of ADN occurs via a series of distinct stages in the condensed phase. The gases evolved from ADN decomposition were N₂O, NO₂, N₂, and H₂O. In contrast, ADN mixed with AN (to simulate aging) did not exhibit the same initial reaction. We conclude that aging inhibits early stage, low temperature decomposition reactions of ADN. Two possible reasons were proposed, these being either a decrease in the acidity of the material due to the presence of AN, or inhibition of the acidic dissociation of dinitramic acid by NO ₃ ^? .     

Highly selective photoinduced perfluoroalkylation of vinylsilanes and its application to synthesis of water-shedding polysilanes

The functionalization of polysilanes is an important subject in materials science because functionalized polysilanes are expected to exhibit potentially innovative properties. This research aims at the addition of a water-shedding property to polysilanes by introducing perfluoroalkyl groups into their skeleton. The photoinduced iodoperfluoroalkylation of various vinylsilanes takes place successfully upon irradiation with a xenon lamp: vinylmonosilanes undergo iodoperfluoroalkylation with perfluoroalkyl iodides (R_fI) regioselectively, and the corresponding perfluoroalkylated silanes are obtained in moderate to high yields. Detailed optimization of the photoinduced iodoperfluoroalkylation has been investigated to apply this method to the functionalization of polysilanes. Polysilanes having vinyl groups can be synthesized by the reductive coupling of dichlorovinylsilanes with samarium diiodide (SmI₂) and samarium metal (Sm) upon irradiation with visible light. The synthesized vinylpolysilanes and R_fI (about 1.0 mM CHCl₃ solution) are coated on a glass plate sequentially, and then the following photoirradiation with light of a wavelength over 300 nm successfully adds an excellent water-shedding property to the glass plate.     

Alignment control of liquid crystals on surface relief gratings

Liquid crystal alignment layers of a high T _g polymer containing an azobenzene moiety are prepared by photofabrication of a surface relief grating (SRG). The interference pattern of a circular and linearly polarized Ar⁺ laser beam generated the surface relief grating and the morphology was detected by atomic force microscope. The optical anisotropy of the films was investigated by polarizing optical microscopy. The orientation of the optical axis of the film mainly depends on the direction of the initial polarization plane. Nematic liquid crystals were aligned parallel to the direction of the grating, but the pretilt angles of the liquid crystals were nearly zero. Irradiation with homogeneous linearly polarized light could also align liquid crystals, but this alignment capability was weaker than that of the SRG film.     

Synthesis and lyotropic liquid crystal properties of chiral helical polycarbodiimides

Chiral helical polymers have been expected to exhibit optical activity with a significantly large optical rotation power. In this paper polymethylphenylethylcarbodiimides (Poly-PhEMCDI) with helical structure were synthesized by the insertion polymerization of a corresponding chiral monomeric carbodiimide initiated by a copper complex. The circular dichroism spectra and optical rotation power induced by the ordered rigid main chain helical structure of polycarbodiimides, in solution and as cast films, were studied. Polycarbodiimides have a rigid rod helical structure and form lyotropic liquid crystal (LLC) in organic solvents such as dichloromethane (DCM), chloroform and THF. The LLC phase was studied using polarizing optical microscopy and X-ray diffraction. A chiral nematic phase was formed in DCM and chloroform in the concentration range 20–36%. Spherulites were formed in more concentrated solution. The formation of a LLC phase in polycarbodiimides organic solutions makes it possible to align the polymer helical chain to form an ordered film for electro-optical applications.     

Photoswitchable organocatalysis in acylation of alcohol using dithienylethene-linked azoles

Three novel dithienylethenes bearing azole derivatives were synthesized and found to undergo reversible photocyclization of the dithienylethene units upon alternate irradiation with UV and visible light. Among them, the dithienylethene-linked imidazole and N-phenylimidazole exhibited a relatively high organocatalytic activity for the acylation of 2-decanol with acetic anhydride, and the catalytic activity of the dithienylethene-linked imidazole could be switched by reversible photoinduced cyclization/cycloreversion of the dithienylethene unit.     

Translational medicine of the glutamate AMPA receptor

Psychiatric and neurological disorders severely hamper patient’s quality of life. Despite their high unmet needs, the development of diagnostics and therapeutics has only made slow progress. This is due to limited evidence on the biological basis of these disorders in humans. Synapses are essential structural units of neurotransmission, and neuropsychiatric disorders are considered as “synapse diseases”. Thus, a translational approach with synaptic physiology is crucial to tackle these disorders. Among a variety of synapses, excitatory glutamatergic synapses play central roles in neuronal functions. The glutamate α-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid receptor (AMPAR) is a principal component of glutamatergic neurotransmission; therefore, it is considered to be a promising translational target. Here, we review the limitations of current diagnostics and therapeutics of neuropsychiatric disorders and advocate the urgent need for the promotion of translational medicine based on the synaptic physiology of AMPAR. Furthermore, we introduce our recent translational approach to these disorders by targeting at AMPARs.     

Proton acceleration to 40 MeV using a high intensity, high contrast optical parametric chirped-pulse amplification/Ti:sapphire hybrid laser system

Using a high-contrast (10(10):1) and high-intensity (10(21) W/cm(2)) laser pulse with the duration of 40 fs from an optical parametric chirped-pulse amplification/Ti:sapphire laser, a 40 MeV proton bunch is obtained, which is a record for laser pulse with energy less than 10 J. The efficiency for generation of protons with kinetic energy above 15 MeV is 0.1%.     

Direct observation of biological molecules in liquid by environmental phase-plate transmission electron microscopy

We have been developing a combination method for environmental TEM (E-TEM) and phase-plate TEM (P-TEM) that enables direct observations of the structure of biological molecules in aqueous solution. It is clearly demonstrated that the biological molecules in a water layer can be imaged by the combined method without any stain. The spatial resolution obtained in the present study was about 10nm. This should be improved by using energy filtering. The image contrast of the specimen in water was reduced in comparison with that in vacuum. A model calculation that includes the effects of beam broadening, intensity decrease, and background increase caused by scattering from the water layer around the specimen shows that an increase in the thickness of the water layer reduces the contrast, intensity, and resolution of the image.     

Design of highly nonlinear dispersion flattened hexagonal photonic crystal fibers for dental optical coherence tomography applications

In this paper, we propose a highly nonlinear dispersion flattened hexagonal photonic crystal fiber (HNDF-HPCF) with nonlinear coefficients as large as 57.5W⁻¹ km⁻¹ at 1.31 μm wavelength for dental optical coherence tomography (OCT) applications. This HNDF-HPCF offers not only large nonlinear coefficient but also very flat dispersion slope and very low confinement losses. Using these characteristics of our proposed PCF, it is shown through simulations by using finite difference method with an anisotropic perfectly matched boundary layer that this PCF offers the efficient supercontinuum (SC) generation for dental OCT applications at 1.31 μm wavelength using a picosecond pulse easily produced by commercially available less expensive laser sources. Coherent length of light source using SC is found 10 μm and the spatial resolutions in the depth direction for dental applications of OCT are found about 6.1 μm for enamel and 6.5 μm for dentin.